Digital radio GTRV-F6E-VB, RS232, 460Mhz, Vehicle

The F6E has enabled with intelligent serial baud rate identification for different RTK devices. It can automatically identify RTK serial baud rate with radio data cable and provide a plug and play form for easy connection between F6E and RTK.

KEY FEATURES

• Supports H/M/L three level transmission power(customized)
• Supports serial baud rate identify between 115200bps,57600bps,38400bps,19200bps, 9600bps
• Compatible communication protocols of ETALK, TRIMTALK™, TRIMMARK™3, Transparent-EOT, SATEL®
• Supports network repeater
• OLED screen display
• IP67 rugged protection

• H:35W 45.4±0.5dBm @DC 12V/10A
• M:22W 43.4±0.5dBm @DC 12V
• L:5W 37±1dBm @DC12V/10A
• RF Power Stability ±1dB

Power Consumption(Typical)

• Transmit Output Power H:(35W) 85W@12V/10A DC
• Transmit Output Power M:(22W) 60W@12V DC
• Transmit Output Power L: (5W) 35W@12V DC

Physical parameters:

• Ingress Protection Rating:  IP67
• Dimension: 175(H)×130(W)×86.5(D)mm
• Weight: 2kg(Net weight)
• Operating Temperature: -40℃ to +65℃
• Storage Temperature: -50℃ to +85℃
• Connector: TNC female
• Data Connector: LEMO 5pin

F6E Attention

• The antenna must be installed before the radio is turned on; Otherwise, it would burn our F6E.
• The radio station used to send the signal must be located on a high ground of position such as top of building, top of mountain, the higher the better distance you able to get.
• The 2.5-meter glass fiber reinforced plastic antenna must be installed vertically and cannot be tilted.
• The power supply current of the radio station must reach at least 10A; Otherwise, the performance would be unstable and short distance only.
• When unplugging the F6E cable, the power must be disconnected first to avoid sparks.
• F6E has been set up when it leaves the factory, and it can be used when it is turned on. There are 32 channels to choose from, please do not modify it yourself;
• If you don’t know how to restore after modifying the settings, you can use the F6E setting tool to import our backup data.
• When the F6E Tool is used, it can be written at 115200, and the configuration can only be viewed at other baud rates.

Transmission distance (experience value)